Mikrotik Dynamic DNS Update Script for No-IP DNS

This script was designed to utilize the No-IP Update API which offers direct access to No-IP's DNS update system.

This script is based on the Dynamic DNS Update Script for DNSoMatic.com.

Tested to work on RouterOS 5.13.


1. Create a new script named no-ip_ddns_update

The following permissions are required for this script to run:

  • write
  • test
  • read


2. Paste the source code that appears below. Edit the user, password, hostname and interface info to match your setup.

# No-IP automatic Dynamic DNS update

#--------------- Change Values in this section to match your setup ------------------

# No-IP User account info
:local noipuser "your_no-ip_user"
:local noippass "your_no-ip_pass"

# Set the hostname or label of network to be updated.
# Hostnames with spaces are unsupported. Replace the value in the quotations below with your host names.
# To specify multiple hosts, separate them with commas.
:local noiphost "hostname.no-ip.net"

# Change to the name of interface that gets the dynamic IP address
:local inetinterface "your_external_interface"

#------------------------------------------------------------------------------------
# No more changes need

:global previousIP

:if ([/interface get $inetinterface value-name=running]) do={
# Get the current IP on the interface
   :local currentIP [/ip address get [find interface="$inetinterface" disabled=no] address]

# Strip the net mask off the IP address
   :for i from=( [:len $currentIP] - 1) to=0 do={
       :if ( [:pick $currentIP $i] = "/") do={ 
           :set currentIP [:pick $currentIP 0 $i]
       } 
   }

   :if ($currentIP != $previousIP) do={
       :log info "No-IP: Current IP $currentIP is not equal to previous IP, update needed"
       :set previousIP $currentIP

# The update URL. Note the "\3F" is hex for question mark (?). Required since ? is a special character in commands.
       :local url "http://dynupdate.no-ip.com/nic/update\3Fmyip=$currentIP"
       :local noiphostarray
       :set noiphostarray [:toarray $noiphost]
       :foreach host in=$noiphostarray do={
           :log info "No-IP: Sending update for $host"
           /tool fetch url=($url . "&hostname=$host") user=$noipuser password=$noippass mode=http dst-path=("no-ip_ddns_update-" . $host . ".txt")
           :log info "No-IP: Host $host updated on No-IP with IP $currentIP"
       }
   }  else={
       :log info "No-IP: Previous IP $previousIP is equal to current IP, no update needed"
   }
} else={
   :log info "No-IP: $inetinterface is not currently running, so therefore will not update."
}


3. Create a new scheduler entry to run this script every 5 mins.

/system scheduler add comment="Update No-IP DDNS" disabled=no interval=5m \
name=no-ip_ddns_update on-event=no-ip_ddns_update policy=read,write,test
  • ROUTER, MIKROTIK
  • 0 Uživatelům pomohlo
Byla tato odpověď nápomocná?

Související články

Manual:The Dude v6/The Dude server on hEX RB750Gr3

Overview New hEX (RB750Gr3) unit is ideal for small to medium size The Dude server...

Mikrotik Find Voip Devices and Add to Address List Script

add interval=5m name=VOIP_Phones_Sched on-event="/system script run VOIP_PHONES"...